• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Guards your vehicle against key cloning & stopping thieves driving it using your original keys. Our latest immobiliser is connected to the CAN data network of your vehicle and a unique pin must be entered in order to start the engine.

Ghost, unlike trackers, doesn't emit radio frequency signals, and therefore cannot be detected by diagnostic tools. Ghost doesn't have LED indicators or buttons that would signal its presence in your vehicle or van.

Anti-key cloning

The Ghost immobiliser was designed to prevent key cloning. The device is connected to your vehicle's data network CAN, and creates an unique pin code by using the factory buttons on your dashboard and steering. This prevents the thief being able to start your vehicle. If the wrong PIN code is entered, the engine will not be started and it will be impossible for them to escape with your joy and pride.

ghost 2 immobiliser reviews immobilisers use new technology that is very difficult for thieves to defeat. Contrary to physical deterrents, such as wheel locks and steering locks that can be cut or taken, the range rover evoque ghost installer immobiliser is a discreet electronic device that cannot be easily detected by regular thieves since it doesn't emit radio signals and works silently.

The new generation of immobiliser is able to protect your car from a myriad of threats, including cloned keys, key-hacking and relay attacks. It can also stop the thief from adding a new key or replacing your ECU by ensuring that it does not allow them to start your car without entering the correct PIN code before entering.

In contrast to other immobilisers the ghost immobiliser 2 does NOT require a key fobs or remotes in order to operate. It can be deactivated by using an app on the driver's smartphone. This makes it ideal for those occasions when you have to give your car over for valet parking or for servicing without keys.

The autowatch ghost installers midlands Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It was designed to be simple and easy to use while remaining as secure as is possible. This is accomplished by connecting the Ghost-II with the vehicle's CAN data network, meaning there are no extra wires that are able to be hidden or easily spotted. It comes with a built-in feature which allows users to disable the Ghost-II simply by connecting to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the latest method used by professional car thieves. Thieves have access to your vehicle's OBD port with little more than an laptop, an app and a few cables that can be purchased online for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they want including setting fault codes, and tuning your car to taking away your pride and joy in under a minute.

It will protect your car from being taken away by requiring a unique PIN code to be entered with your key fob prior to you start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is undetectable by any RF scanning technology or code grabbing. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.

To use an OBD hacking device, you'll need to have a laptop that has software capable of reading the OBD protocol. These can be bought for less than PS100 on eBay or Amazon. You will also need a cable with OBD pins which are connected to the CAN bus, these are available on eBay and Amazon for about PS50. Then, you need to splice the cable into the wire harness of your vehicle for example, the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they can send diagnostics to the system at high baud rates that can crash the CAN, and prevent systems within your vehicle from functioning. This can cause the engine to stall or even lock doors, and even the brakes to engage.

No additional key fobs or remotes required.

The car immobiliser is an excellent piece of anti-theft technology that is utilized by millions of modern cars all over the world. An aftermarket immobiliser protects your vehicle with engine ECU software that stops cars from starting when a false transponder is transmitted.

However, it can be easy for thieves to bypass an immobiliser system when they have access to the code to deactivate it. A thief could easily remove the battery from most key fobs by squeezing them open. They could then use an instrument to take out the internal circuit board from an immobiliser and replace it with a blank. They'll then be able to start your car.

With the TASSA approved ghost installers near me 2 immobiliser, there are no additional keys or remotes needed. The immobiliser communicates with vehicle's engine ECU (Engine Control Unit) via a discrete and silent data circuit in CAN that is unnoticeable with diagnostic tools such as the ones used by high-tech thieves. It also does not make use of a traditional key-fob that has LED indicators, which means it is able to go unnoticed at a glance.

There will be times that you must deactivate Autowatch Ghost 2's automatic security for example, when you are doing a valet parking or service work. The ghost CAN immobiliser has a special mode for this, called "Service Mode' which is activated by pressing an app on your smartphone. The vehicle can still be operated, but the maximum speed is restricted to 36 mph for added security.

If you'd like to learn more about the TASSA accredited ghost 2 immobiliser fitting near me immobiliser, please contact us today to arrange an appointment in our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost 2 Immobiliser installation Near me is a next generation device that can secure your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personalised PIN can be created using buttons on the steering wheel and dash. The system blocks engine start and cannot be bypassed because no RF signals are emitted from the device. This makes it impossible to be detected using sophisticated RF scanning and code grabbing techniques employed by modern thieves.

The PIN code is able to be changed to lock out earlier drivers or include an override number if you forget the sequence. During installation the installer will show how to accomplish this. The system also comes with the option of a valet mode that can be used to temporarily disable the pin input sequence to allow your garage or mechanic can service the car without having to know the code. This is a great option for those who don't want their PIN sequence to be disclosed, but wish to leave their car with valet parking or service.

Contrary to Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons on your car to create a unique and interchangeable PIN code sequence. This sequence is entered through the smartphone app. There are no additional LED indicators are thrown out, and your car is secured without risk of being disabled.

Tested for every vehicle

Contrary to key fobs which require you to press buttons on them, a ghost immobiliser is hidden under your steering wheel or dash to make sure you are unaware it's there. The device is connected to the CAN network in your vehicle and a PIN number can be programmed using buttons on your car. The system will then stop the engine from starting until the code has been entered prior to. This means that thieves can't copy the keys to your car or use the OBD to hack into it.

Ghost is a great option for all vehicles that use electric vehicles motorhomes, vans, motorhomes and bicycles. It's also incredibly versatile and can be programmed to deactivate in various scenarios. It is possible to program it to enter Valet mode, for instance when your vehicle is transferred to a valet service or parking company. This means that your car can be operated within a specified 30mph speed limit, and the ghost immobiliser will reactivate itself when it is returned to your possession.

The device can be reset at any time to your personal PIN number. This is helpful when you forget the code or the device ceases to function which means it's just as good as new.

It's also important to note that the device is completely inaccessible to those who aren't familiar with it. It does this by analyzing the buttons on your steering wheel and dashboard, and using the data it sends to identify the button that was hit. This makes it a safe and secure security system that can't be tampered by RF scanning, jamming, or door lock pick set.